AMT Datasouth Fastmark 4000 - Manual (Page 111)

110 User's Guide
2. Send the file, READER.FRM to printer under MS-DOS
>COPY/B READER.FRM LPT1:
3. Turn off the printer.
4. Connect the barcode reader to the serial port.
5. Set switches 6, 7 and 8 on the back of the printer to the ON positions.
6. Turn on the printer.
7. The preprogrammed form, READER will start automatically executing.
Scan the product name and number from the printed bar codes by the barcode reader.
Product Name ?
APPLE ↵ ↵
Product No. ?
11223344 ↵ ↵
8. A label will be printed. The copy count depends on the PA command for the READER
form. The printer will then return to the Ready for input display screen.
Output