American Energy Systems Ovation - Manual (Page 23)

Version 7.1 23
DO NOT use abrasives such as steel wool or powder abrasives as they will permanently damage the
glass. Once the glass has been scratched, complete replacement of the glass will be required. Use
only approved 1400 degree Fahrenheit (°F) high temperature stove ceramic glass to replace any
cracked or broken glass.
FIGURE 8: DOOR GLASS REPLACEMENT
GLASS REPLACEMENT
The glass used in the Ovation stove is a 1400 degree Fahrenheit (° F) high temperature ceramic
glass. If the glass should crack or break for any reason, it must be replaced with an equal or better
grade ceramic glass. The use of tempered glass or ordinary glass IS NOT AUTHORIZED and is
hazardous to use. Ovation replacement glass can be purchased from an authorized Country Flame
dealer. See FIGURE 8 for securing points for the door glass.
GLASS-CERAMIC SPECIFICATIONS
Manufacturer
Euro Kera
Window Type Glass-Ceramic, Kera Lite ®
KERA LITE® glass-ceramic has a thermal endurance far exceeding that of normal tempered glass.
KERA LITE® is designed to operate at temperatures ranging from -400
0 F to +1400 0 F. Despite its
superior thermal properties, KERA LITE® stove windows should be treated with care. This glass-
ceramic can still be scratched or broken by mechanical abuse. When cleaning the window, use only
non-caustic, non-abrasive cleaners. Ovation stoves use KERA LITE® glass-ceramic that is 0.197
inches thick +/- 0.008 inches. Country Flame custom cuts each KERA LITE® glass at its factory
to fit Ovation stoves. If problems occur or your glass needs replacement, contact Country Flame or
a local authorized dealer for assistance in replacing the glass.
CAUTION:
Do not attempt to clean hot glass. Do not abuse, strike, slam shut, or operate
the Ovation stove with any broken glass in the appliance.