beautypg.com

American Energy Systems MF3650 Exhaust Blower User Manual

Page 2

background image

F:\AESBusinessSystems\AES Technical\Piece part instructions\MF3650 Exhaust Blower 2-
speed.doc

• Slip rectangle end of the exhaust tube over the rectangle outlet of the new exhaust

blower. Push tight until the exhaust tube hits the flange of the exhaust blower housing.
Making sure the tube alignment to blower is straight.















• Neatly, compress caulking using finger around all four sides of the exhaust tube. Make

sure equal amounts of caulk are on the exhaust tube and the exhaust housing providing a
leak free seal.












• Fasten the exhaust tube to the

blower housing using the #8 tek
screws listed above.





• From the back of the unit, look

into the exhaust tube. If any high
temp silicone is visible clean out
with a hacksaw blade.