ADLINK CM3-GF - Manual (Page 93)

TME-104P-CMx-GF-1V7
Rev 1.7 Appendix D
Appendix D, Revision History
Filename Date
Edited
by
Change
TME-104P-CFR_AF_0V0.docx 2012-03-15 OF Draft
TME-104P-CFR-AF-0V1 2012-03-26 MF First release
TME-104P-CFR-AF-1V0 2012-09-06 AG Corrections after redesign
TME-104P-CFR-AF-1V1 2012-12-01 MF Minor changes
TME-104P-CFR-AF-1V2 2012-13-24 MF Proven by technical writer
TME-104P-CFR-AF-1V3 2013-01-29 BR Block diagram updated (ADMT changed into SEMA)
TME-104P-CFR-AF-1V4 2013-02-18 AG Correct revision number, add chapter 4.1 BIOS
TME-104P-CM2-GF-1V5 2013-03-15 AG/MF Product name change to CoreModule®2-GF, CM2-GF,
Logo front cover replaced
Name change LEMT to SEMA
Add the BIOS screens in chapter 4, correct RS485
termination
TME-104P-CMx-GF-1V6 2013-09-11 BR 
Product name changed from CM2-GF into CMx-GF
because manual is valid for CM2-GF (PC/104-Plus) and
CM3-GF (PCI-104).

Connector and Jumper Locations updated

Block Diagram updated

Ordering Information updated and CMx-GF Standard
Variant Comparison Table added

AMD T16R APU added under “Features”
TME-104P-CMx-GF-1V7 2013-10-02 MF 
Add chapter 4.5 GPIO programming incl. sample code

Add warning to X2 pin out that pin 1 marker may be
wrong.”

Add chapter 1.5 heat sink solutions