ADLINK CM3-GF - Manual (Page 37)

TME-104P-CMx-GF-1V7 Rev 1.7 29 (81)
 SATA is configured as SATA AHCI, and CFast is configured as IDE mode. In this configuration, the
programming interfaces of channels 4 and 5 (CFast) are under the IDE controller.
SATA Connector (X27)
Connector type: SATA
Adapter cable n/a
Pin Signal
1 GND
2 Data_TX+
3 Data_TX-
4 GND
5 Data_RX-
6 Data_RX+
7 GND
CFast Connector (X27)
Connector type: CFast
Pin Signal Pin Signal
1 GND 13 NC
2 Data_TX+ 14 GND
3 Data_TX- 15 SATA_ACT#
4 GND 16 NC
5 Data_RX- 17 NC
6 Data_RX+ 18 NC
7 GND 19 NC
8 NC 20 +3.3V
9 GND 21 +3.3V
10 NC 22 GND
11 NC 23 GND
12 NC 24 NC