Dialogic TX4000 PCI SS7 - Manual (Page 7)

1 1
Introduction
The Dialogic ® TX 4000 PCI SS7 Network Interface Board Installation Manual explains
how to perform the following tasks:
• Install the TX 4000 PCI SS7 Network Interface board
• Configure the TX 4000 PCI SS7 Network Interface board
• Establish network connections
• Verify the installation
This manual targets developers of telephony and voice applications who use TX 4000
boards with Dialogic
® NaturalAccess™ Signaling Software. This manual defines
telephony terms where applicable, but assumes that the reader is familiar with
telephony concepts, switching, and the C programming language.
Note: The product(s) to which this document pertains is/are among those sold by
NMS Communications Corporation (“NMS”) to Dialogic Corporation (“Dialogic”) in
December 2008. Certain terminology relating to the product(s) has been changed,
whereas other terminology has been retained for consistency and ease of reference.
For the changed terminology relating to the product(s), below is a table indicating
the “New Terminology” and the “Former Terminology”. The respective terminologies
can be equated to each other to the extent that either/both appear within this
document.
Former terminology Current terminology
NMS SS7 Dialogic ® NaturalAccess™ Signaling Software
Natural Access Dialogic ® NaturalAccess™ Software
Dialogic Corporation 7