Dialogic TX4000 PCI SS7 - Manual (Page 12)

Overview of the TX 4000 board TX 4000 PCI SS7 Network Interface Board Installation Manual
Utilities and demonstration programs
NaturalAccess Signaling Software provides the following utilities and demonstration
programs for the TX 4000 board. Run these programs from the \Program
Files\Dialogic\tx\bin directory in Windows and from the /opt/dialogic/tx/bin directory
in UNIX. For more information about each utility, refer to the Dialogic® TX Series
SS7 Boards TX Utilities Manual.
Utility Description
cpcon Uses NaturalAccess to manage communication with the TX board. This utility is an operator
console run from the command line.
If you want to bypass the NaturalAccess layer, use the cpcon_ utility to monitor the TX
operating system.
cplot Loads communications processor tasks to TX boards.
cpmodel Displays the board type for each installed TX board.
pcigetcfg Obtains bus and slot information during software installation (UNIX only).
txalarm Uses NaturalAccess to display and optionally log alarm messages generated by NaturalAccess
Signaling Software tasks running on all TX boards.
If you want to bypass the NaturalAccess layer, use the txalarm_ utility to display and
optionally log alarm messages.
txccode Displays a text description of a completion code (error code) reported by a TX board.
txconfig Configures TDM and IP based interfaces on TX 4000 boards. ss7load calls txconfig at board
boot time. For more information, refer to the Dialogic® NaturalAccess™ Signaling Software
Configuration Manual.
txcpcfg Assigns CP numbers to TX boards based on bus and slot.
txdiag Provides diagnostic information about TX boards.
txdump Dumps the contents of the shared memory used for communication between the TX board
and the host driver.
txeeprom Displays information stored in the EEPROM.
txflash Updates the operating system stored in the TX board Flash memory.
txinfo Obtains detailed TX 4000 board information.
txlocate Blinks the end bracket LEDs of a TX 4000 board.
txreset Resets a TX board and reboots the board from the operating system image stored in Flash
memory.
txsnap Generates a core dump of a TX 4000 board, creating a snapshot file.
txstats Displays statistics maintained by the TX device driver.
12 Dialogic Corporation