ADLINK PXIS-2719A - Manual (Page 58)

48 Monitoring/Control Functions
ret= SetFanAlarm(hCom,speed);
SetTempAlarm
Description
Sets chassis temperature threshold, which, if exceeded in a
sensor reading, triggers the temperature alarm.
Syntax
BOOL SetTempAlarm(HANDLE hCom ,int temp)
Parameters
com:
An initialized COM port.
temp:
Temperature alarm threshold ( unit: °C, range : 0~100)
Return Value
TRUE if the function succeeded, FALSE if failed.
Example
BOOL ret;
int temp = 60;
ret= SetTempAlarm(hCom,temp);
Set5VAlarm
Description
Sets the chassis DC 5V threshold, beyond which the DC 5V
voltage triggers the alarm.
Syntax
BOOL Set5VAlarm(HANDLE hCom ,float H, float L)
Parameters
com: