ADLINK ACL-8454/12 - Manual (Page 47)

High-Level Programming • 39
♦ With CD-ROM:
1. Turn your PC's power switch on.
2. Put the CD-ROM into your CD-ROM drive.
3. Type the commands:
Dos:
X:\> CD\NuDAQISA\8454\DOS
X:\NuDAQISA\8454\DOS> SETUP
(x identifies the drive that contains the CD-ROM)
After installation, all the files of ACL-8454 Library & Utility for DOS
are stored in C:\ADLink\8454\DOS directory.
Windows 3.1:
X:\> CD\NuDAQISA\8454\WIN31
X:\NuDAQISA\8454\DOS> SETUP
(x identifies the drive that contains the CD-ROM)
After installation, all the files of ACL-8454 Library & Utility for
Windows 3.1 are stored in C:\ADLink\8454\W31 directory.
♦ Win-95/Win-NT Software Installation
With "ACL-8454 Library & Utility" diskette:
1. Turn your PC's power switch on.
2. Put the " ACL-8454 Library &Utility" diskette into your floppy drive A:
or B:
for Win-95 : A:\Win95\SETUP.EXE
for Win-NT: A:\WinNT\SETUP.EXE
With CD-ROM:
step 1: Place the ADLink CD-ROM into the appropriate CD drive.
step 2: If auto-run setup program is not invoked automatically,
please execute X:\setup.exe. (X indicates the CD-ROM
drive)
step 3: Select NuDAQISAÆACL-8454ÆWin95DLL or NuDAQISA
Æ ACL-8454ÆWinNT DLL to install software.