ADLINK ACL-8454/12 - Manual (Page 37)

Signal Connections & Applications • 29
4
Signal Connections &
Applications
This chapter describes the connectors and some application wiring of the
ACL-8454. Including the signal connection between the ACL-8454 and
external devices, such as daughter boards or other devices.
4.1 Connectors Pin Assignment
The ACL-8454 comes equipped with a D-type 37 pin female connector
(CN1). The CN1 is located at the rear plate. The pin assignment of the
connector is illustrated in the Figure 2.1. Refer to section 2.1 for details of
pin assignment.
4.2 Daughter Board Connection
The ACL-8454 can be connected with daughter boards ACLD-9137, ACLD-
9138, ACLD-9188, and DIN-37D to extend the bus.