ADLINK PCI-7396 - Manual (Page 16)

8
• Installation
2.2 Unpacking
Your PCI-7396 card contains sensitive electronic components that can be
easily damaged by static electricity.
The card should be done on a grounded anti-static mat. The operator
should be wearing an anti-static wristband, grounded at the same point as
the anti-static mat.
Inspect the card module carton for obvious damage. Shipping and handling
may cause damage to your module. Be sure there are no shipping and
handing damages on the module before processing.
After opening the card module carton, exact the system module and place it
only on a grounded anti-static surface component side up.
Note: DO NOT APPLY POWER TO THE CARD IF IT HAS BEEN
DAMAGED.
You are now ready to install your PCI-7396.