ADLINK cPCI-9116 - Manual (Page 14)

4
• Introduction
• Trigger Mode:
3 Software-trigger.
3 Pre-trigger.
3 Post-trigger.
3 Middle-Trigger.
3 Delay Trigger
• Data Transfer:
3 Polling.
3 EOC interrupt transfer.
3 FIFO half-full Interrupt transfer.
3 Bus-mastering DMA.
•
Data Throughput: 250KHz (maximum)
♦ Digital I/O (DIO)
• Channel: 8 TTL compatible digital inputs and outputs
•
Input Voltage:
3 Low: VIL=0.8 V max. IIL=0.2mA max.
3 High: VIH=2.0V max. IIH=0.02mA max
• Output Voltage:
3 Low: VOL=0.5 V max. IOL=8mA max.
3 High: VOH=2.7V min; IOH=400
μA
♦ General Purpose Timer/ Counter
• Number of channel: One 16-bit Up/Down Timer/Counter
• Clock Input: Internal 24MHz or External CLK input up to 20MHz