Denon DN-V310 - Manual (Page 30)

23
ENGLISH
3
Press the ENTER button to decide the menu item.
q When “HDMI RES.” (HDMI Resolution) is selected:
Use
the 5 and ∞ cursor buttons to select the HDMI out, press the
ENTER button to decide.
• AUTO : When HDTV and HDMI are connected, some TVs may
automatically decide the appropriate HDMI RES.
• OFF : HDMI is turned OFF. When this is set, Component Video
output switches to Interlace.
• 480p/576p
: HDMI switches ON, and the output resolution is
480p/576p. When this is set, Component Video output
switches to Progressive.
P.SCAN lights on the display.
• 720p : HDMI switches ON, and the output resolution is 720p.
No output signals are output from Video out, S-Video out,
or Component out.
• 1080i : HDMI switches ON, and the output resolution is 1080i.
No output signals are output from Video out, S-Video out,
or Component out.
The relationships between the HDMI RES. settings, the output signals
from each of the video output connectors, and the display in each of
the conditions are shown below.
Video Output Connector
HDMI RES. setting
AUTO OFF 480p 720p 1080i
VIDEO 480i/– 480i 480i — —
S-VIDEO 480i/– 480i 480i — —
COMPONENT 480i/– 480i 480p — —
RGB (SCART)
(Europe model only)
480i/– 480i 480i — —
HDMI
480p
720p
1080i
— 480p 720p 1080i
Display
HDMI LED –/Lights — Lights Lights Lights
P.SCAN
(Display for Component)
— — Lights — —
• AUTO is output when the HDMI connector is connected to a HDTV
and the TV power is ON. The TV automatically selects one of
480p/576p/720p/1080i. If 720p or 1080i is selected, no video signals
are output from any of the video connectors other than HDMI.
Occasionally the TV may not automatically select the appropriate
output or other trouble.
If this occurs select a different setting to AUTO.
• When set to OFF, the COMPONENT output switches to interlaced
output.
• When set to 480p/576p, the COMPONENT output switches to
progressive output.
• 480i/480p is for NTSC. 576i/576p is for PAL.
ENTER
Remote control unit Remote control unit
q
HDMI RES. AUTO
4:3 PS
NTSC
SET: ENTER BUTTON
TV ASPECT
SET HDMI RES.
SELECT:
TV TYPE
BASIC BRIGHTNESS
BASIC SHARPNESS
COMPONENT VIDEO OUT
FULL VIDEO MODE
VIDEO SETUP
CONSUMERS SHOULD NOTE
THAT NOT ALL HIGH DEFINITION
TELEVISION SETS ARE FULLY
COMPATIBLE WITH THIS
PRODUCT AND MAY CAUSE
ARTIFACTS TO BE DISPLAYED
IN THE PICTURE. IN CASE OF
525 OR 625 PROGRESSIVE
SCAN PICTURE PROBLEMS,
IT IS RECOMMENDED
THAT THE USER SWITCH
THE CONNECTION TO THE
“STANDARD DEFINITION”
OUTPUT.