Changing the default settings, English – Denon DN-V310 User Manual
Page 27
20
ENGLISH
,
, CHANGING THE DEFAULT SETTINGS
■ Make the initial settings to suit your usage conditions before starting playback.
The initial settings are retained until they are next changed, even if the power is turned off.
1
TOP MENU
/PBC
MENU
RETURN
ANGLE
DISPLAY STOP STILL/PAUSE
PLAY
RC-963
ENTER
SETUP NTSC/PAL
ZOOM SLIDE SHOW
SLOW/SEARCH
SKIP
2
3
1
Turn on the power.
• Press the power button, the power indicator lights and the power
turns on.
Main unit
2
In the stop mode, press the SETUP button.
• The setup (default settings) screen appears.
NOTE:
• For some menus, the initial values can be changed during playback.
VIDEO SETUP
Use this to set the DN-V210/DN-V310’s screen mode.
(HDMI RES., TV aspect, TV type, Brightness, Sharpness and Video
output (Europe model only).)
AUDIO SETUP
Use this to set the DN-V210/DN-V310’s audio output mode.
(Digital and LPCM output settings.)
DISC SETUP
Use this to set the language to be used when playing the disc.
If the set language is not offered on that disc, the discs default
language is set.
SYSTEM SETUP
On-screen display language setting: The initial settings screen’s
language setting, etc., the viewing restriction level and playback of
adult DVDs you do not want children, etc., to see can be restricted.
The number of initial setting items can be increased.
DivX SETUP
You can check the initial DivX language setting and DivX video on
demand.
Remote control unit
HDMI RES.
AUTO
4:3 PS
NTSC
SET: ENTER BUTTON
TV ASPECT
SET HDMI RES.
SELECT:
TV TYPE
BASIC
BRIGHTNESS
BASIC
SHARPNESS
COMPONENT
VIDEO OUT
FULL
VIDEO MODE
VIDEO SETUP
# : This item is displayed for Europe model
only.
: This item is displayed for EXPERT mode.
(See page 35.)
3
Use the
2 and 3 cursor buttons to select the desired setting item.
Select “VIDEO SETUP”. (See page 22.)
Select “AUDIO SETUP”. (See page 26.)
Select “DISC SETUP”. (See page 28.)
Select “SYSTEM SETUP”. (See page 33.)
Select “DivX SETUP”. (See page 36.)
Remote control unit
✽ To exit the setup mode
Press the SETUP button.