Datalogic Scanning GRYPHONTM MX30 - Manual (Page 186)

GRYPHON™ Dx30/Mx30
A
CODE SELECTION (continued)
DESCRIPTION STRING
EAN/UPC UPC E check digit transmission
disable AAJ0
enable AAJ1
conversions UPC E to UPC A AAA
UPC E to EAN 13 AAB
UPC A to EAN 13 AAC
EAN 8 to EAN 13 AAD
enable ISBN AP1
enable ISSN AP2
enable ISBN and ISSN AP3
ISBN Conversion codes
disable ISBN and ISSN AP0
Code 39 disable Code 39 family AB0
Standard no check digit control AB11
check digit control and transmission AB12
check digit control without transmission AB13
Full ASCII no check digit control AB21
check digit control and transmission AB22
check digit control without transmission AB23
CIP 39 AB3
Code 32 AB4
code length AB*xxxx
2/5 disable Code 2/5 family AC0
Interleaved 2/5 no check digit control AC11xxxx
check digit control and transmission AC12xxxx
check digit control without transmission AC13xxxx
Normal 2/5 5 bars no check digit control AC21xxxx
check digit control and transmission AC22xxxx
check digit control without transmission AC23xxxx
Industrial 2/5 (IATA) no check digit control AC31xxxx
check digit control and transmission AC32xxxx
check digit control without transmission AC33xxxx
Matrix 2/5 3 bars no check digit control AC41xxxx
check digit control and transmission AC42xxxx
check digit control without transmission AC43xxxx
CIP/HR AC5
xxxx
= ASCII numbers that define the code length where:
• First 2 digits = minimum acceptable code length.
• Second 2 digits = maximum acceptable code length.
The minimum code length must always be less than or equal to the maximum.
The maximum code length for all codes is 99 characters:
Examples:
0132 = variable length from 1 to 32 digits in the code.
1010 = 10 digit code length only.
176