Detaching and attaching the front panel, Attaching the front panel, 1 press pwr to turn the unit off – Aiwa CDC-X116 User Manual
Page 5: Security lamp
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

DETACHING AND
ATTACHING THE FRONT
PANEL
Attaching the front panel
You can detach the front panel from the unit and 
carry it with you when you leave your car 
unattended.
When you carry the front panel out of your car,
use the supplied carrying case.
Before detaching the front panel, remove the disc 
to prevent possible damage to the unit.
1
Press PWR to turn the unit off.
2
While supporting the front panel with
one hand, press i to release one side 
of the panel. Care must be taken not to 
drop the panel. It may suddenly eject at 
this point.
3
When the front panel is lifted from the
unit, remove it by pulling away from the
unit.
Do NOT touch the connector on the reverse
side of the front panel, as doing so may 
contaminate the connector and cause a poor 
connection resulting in a malfunction.
Security Lamp
When the front panel is detached, you can find an 
LED lamp on the front side of the unit. This lamp 
is designed to deter theft, and continues to flash 
when the front panel is detached. This unit is not
equipped with any other security systems such
as a security alarm, so there are limitations to its
effectiveness.
1____________
1 °
O
if
(O)
» E
LED lamp
ENGLISH
4
