Dolby Laboratories DP503 - Manual (Page 52)

5-16
to place the cursor to the next position. When you have finished entering the number,
press ENTER to store the name; you will then proceed to the next screen.
Available characters:
0 6
1 7
2 8
3 9
4 *
5 #
SPACE
Note: Spaces can be used to make the phone number more readable.
The next step allows you to edit the encoder parameters
EDIT CODEC? Y N
Algorithm Data Channel Sample Aux
Type Rate Mode Rate Rate
As usual, use the
Å
and
Æ
arrow keys and the ENTER key to make your selection.
If you choose Y, you will be shown a facsimile of the encoder screen, except that the
space between parameters is in reverse video. Modify the encoder parameters as
desired, using the procedure outlined earlier in Section 5.2
For conventional Dolby Fax applications, you should accept the default encoder
parameters (or use the push-buttons to modify as needed so that is the case):
Default encoder parameters for Dolby Fax:
Parameter Value
Algorithm Type AC-2
Data Rate 256
Channel Mode 2C
Sample Rate 48
Aux Rate 12
If you choose N, you will continue on to the next screen.
The next step allows you to edit certain parameters associated with ISDN calls that
determine the type of inverse multiplexing that will be used to make the call.
MAIN