10 isdn connections – Dolby Laboratories DP503 User Manual
Page 36
4-6
console (or next piece of equipment) for the desired operating level. Refer to the
manual supplied with the DP524 as necessary.
Note::
The test tone level in both the DP503 encoder and DP524 decoder is referenced to -18dB relative to
digital full scale.
4.6.10
ISDN Connections
Attach the RJ-11 connectors for each of the ISDN lines used (1-4, typically 2) to
the appropriate receptacles at the rear of the ISDN unit. Facing the rear of the unit,
Line 1 corresponds to the lower-most receptacle at the right side of the unit. Lines
2-4 are located in a row above the receptacle for Line 1; they are numbered 2
through 4, respectively, from left to right.
Note:
Be sure to note which phone number is connected to which line, as they will need to be entered
correctly during the Dolby Fax setup procedure.
Proceed to Section 5 for ISDN setup and Dolby Fax operation. Be sure to read the
overview in Section 2A.
MAIN