2a.6 quick start for placing dolby fax calls, 2a.7 receiving dolby fax calls – Dolby Laboratories DP503 User Manual

Page 20

2A-4

Parameter

Value

Algorithm Type

AC-2

Data Rate

256

Channel Mode

Sample Rate

Aux Rate

ISDN (Inverse Multiplexing type)

BONDING-1 64

4. Save the directory entry.

2A.6

Quick Start for Placing Dolby Fax Calls

Note

Refer to Section 5.4.3 for a comprehensive procedure on making calls.

1. Press DIR.

2. Select USE.

3. Find the desired directory listing by scrolling with the

ÇÈ keys.

4. Press ENTER. The call will be initiated. Look for

ÆÆLOCATION on

the display to confirm that the call is established.

Hint:

You will also see the Lock LED on the DP524 become green, and the Mute LED on the DP524

extinguish.

5. Remember to Hang Up by pressing Shift +

È or ESC. Select Y to

confirm.

2A.7

Receiving Dolby Fax Calls

Call setup is automatic: The ISDN unit will automatically answer an incoming call,
and the DP524 decoder unit will automatically configure itself for the proper
algorithm.

But, your DP503 encoder must be manually set to match the incoming call:

1. With the DP503 in the default encoder parameters screen, make

adjustments to the encoder, if necessary, to match the incoming algorithm,
data rate, channel mode, sample rate, and aux rate.

Note:

Refer to Section 5.2 for a comprehensive procedure on changing encoder parameters.

MAIN