3 to change channel mode, 4 to change sample rate – Dolby Laboratories DP503 User Manual

Page 42

5-6

arrow key to both select the entry and move to the next parameter. Units are kbps

(kilobits per second).

Note:

Available rates are dependent on the selected algorithm. Data rates displayed represent the total data

rate.

Available data rates:

Display

040

096

224

048

112

256

056

128

320

064

160

384

080

192

448

5.2.3

To change Channel Mode

AC2 256 2C 48 12

Algorithm

Data

Channel

Sample

Aux

Type

Rate

Mode

Rate

Use the

and

arrow keys to place cursor on the first character of settings in the

Channel Mode column. Use the

and

arrow keys to scroll through available

settings as shown in the table below. Use the ENTER key to select the chosen value,
or press the

arrow key to both select the entry and move to the next parameter.

Note

Available channel modes are dependent on the selected algorithm and data rate.

Available channel modes:

Label

Channel Mode

Comments

Mono

Accepts audio from Ch A only

Dual mono

Joint stereo

5.2.4

To change Sample Rate

Use the

and

arrow keys to place cursor on the first character of settings in the

Sample Rate column. Use the

and

arrow keys to scroll through available settings

as shown in the table below. Use the ENTER key to select the chosen value, or press
the

arrow key to both select the entry and move to the next parameter.

Note

Available sample rates are dependent on the selected algorithm.

MAIN