American Dryer Corp. AD-100 - Manual (Page 12)

mifffENANCE
CLfANING
Be sure the snap action thermostat is kept free from lint accumulation. Clean
the lint from the bottom of the lint chamber and from the lint screen a minimum
of once a week. These cleaning suggestions are important for efficient opera­
tion.
m ADJUsirefi
should be done periodically.
le bearings are prelubricated with the proper amount of high quality grease.
Though greasing interval depends on quality of grease and operating conditions
of the bearings, we suggest you grease the bearings monthly. See the instruc­
tions printed on the motor back plate for lubrication.
DOOR swum
Periodically check door switch, located behind lower front panel for lint
buildup. Switch body can be cleaned by opening lint door and reaching up
behind front panel. Shut electrical power to dryer OFF before cleaning
switch.
7-6