Directed Electronics 120XV - Manual (Page 38)

35 © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
Shock Sensor : This is a sensor mounted in the vehicle that is
designed to pick up impacts to the vehicle or glass.
Siren : Noise generating device usually installed in the engine com-
partment of the vehicle. It is responsible for generating the "chirps"
you hear, as well as the six tones you hear while the alarm is triggered.
Trigger or Triggered Sequence: This is what happens when the
alarm "goes off" or "trips". The triggered response of your system
consists of the siren sounding and parking light flashing for the
programmed duration.
Valet ® Button : A small push-button switch mounted somewhere
inside the vehicle. It is used to override the alarm when a 2-way
remote is lost or damaged, or to enter or exit Valet ® mode.
Warn Away Response: Lighter impacts to the vehicle will generate
the Warning Zone response. It consists of several seconds of siren
chirps and parking light flashes.
Zone : A zone is a separate input that the alarm can recognize as
unique. Each input to the system is connected to a particular zone. Two
or more inputs often share the same zone.