Directed Electronics 120XV - Manual (Page 36)

33 © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
disarming the vrs ®
Take the time to familiarize yourself with the VRS ® triggering sequence
and the disarm procedure. It is important to recognize and identify the
VRS ® trigger sequence and know how to disarm it in case of accidental
activation.
Once the VRS ® is armed, it does not disarm automatically. You must
disarm it the next time you operate the vehicle. You must disarm it
with one of the following procedures:
If the system has not entered the triggered sequence (siren has not
started chirping):
1. Turn the ignition on.
2. Press on the 2-way remote for one second. The
lights will flash and the siren will chirp twice.
If the system has entered the triggered sequence (siren has begun
chirping), pressing the disarm button of the 2-way remote will not disarm
VRS ® . To disarm the VRS ® during a VRS ® trigger sequence:
1. Turn the ignition on.
2. Press the Valet ® button the pre-programmed number
of times to disarm the VRS system.
DRW-35
➜