Directed Electronics 120XV User Manual

Page 23

NPC

is programmable. See Programming Options section of this guide.

uxxiilliia

arryy o

uttp

uttss ((o

pttiio

nss))

This system also supplies outputs that can control convenience options

such as remote control trunk release and window automation. Consult

your dealer for available options for your system.

Channel 2 Trunk release: When connected, pressing

for 1.5

seconds will remotely release the vehicle trunk lid.

Channel 4 auxiliary output: When connected, pressing

and

will immediately activate this output to control an additional conve-

nience option.

Channel 5 auxiliary output: When connected, pressing

and

will immediately activate this output to control an additional conve-

nience option.

The remote will respond with a page notification consisting of an out-

put tone (once) and the Yellow LED will flash 3-times. This occurs at

the remote after the system has received the command to activate any

of the Auxiliary outputs.

NOTE: Arming and disarming the system does not reset this func-
tion.The only ways to reset a bypassed zone are for it to not trig-
ger for 60 minutes, or to turn on the ignition. If testing your sys-
tem, it is important to remember that the NPC® programming
can cause zones to be bypassed and appear to stop working. If
five chirps are heard when disarming, NPC® has been engaged.
If you wish to clear the NPC® memory, turn the ignition key on.