Directed Electronics 120XV User Manual

Page 37

gllo

ossssa

arryy o

off tte

errm

mss

2-Way Remote

: Hand-held, 2-way transceiver which operates the

various functions of your system.

Control Unit:

The "brain" of your system. Usually hidden under the

dash area of the vehicle. It houses the microprocessor which monitors

your vehicle and controls all of the system's functions.

Fail Safe Starter Kill

: An automatic switch controlled by the security

system which prevents the vehicle’s starter from cranking whenever the

system is armed. The vehicle is never prevented from cranking when the

system is disarmed, in Valet

mode, or should the starter interrupt switch

itself fail. Your system is ready for this feature, however installation may

require additional labor.

Input

: A physical connection to the system. An input can be provided

by a sensor, pinswitch or through an existing system in the vehicle,

such as ignition or courtesy lights.

In-vehicle status LED

: A light mounted somewhere in the vehicle.

It is used to indicate the status of your system. It is also used to report

triggers and faults in the system or sensors.

NOTE: If the VRS

system has begun its chirping sequence, the

ignition must be turned off, then on to disarm. If you are driving
the vehicle at the time, pull to a safe place away from traffic and
follow the triggered sequence disarm procedure.