Directed Electronics 120XV - Manual (Page 25)

22 © 2 0 0 4 d i r e c t e d e l e c t r o n i c s , i n c .
Circuitry has bypassed that zone. The in-vehicle status LED will indicate
which zone was involved. (See Table of Zones section of this guide.) The
system will retain this information in its memory, and continue to chirp
four or five times each time it is disarmed, until the next time the igni-
tion key is turned on.
system status chirps
The siren will chirp when arming/disarming the system. The pattern of
chirps will audibly report the system’s status as described below.
table of zones
The zone number is the number of in-vehicle LED flashes used by the
system to identify that input. The standard input assignments are
listed below, along with spaces to write in any optional sensors or
switches you have had installed.
➜
Action Number of Chirps Description
Arm 1 System armed
Arm 1 (3-second delay), 1 System armed with
Bypass Notification
Disarm 2 System disarmed
Disarm 4 System disarmed with
Tamper Alert
Disarm 5 System disarmed NPC
active
➜