Silent mode – Directed Electronics 120XV User Manual

Page 20

The remote will indicate disarm notification with 2 beeps and 3 flashes

of the Orange LED.

silent mode

To temporarily turn off the arm or disarm chirps, use Silent Mode™.

Simply press

for less than one second before arming or disarming,

and the confirmation chirp(s) will be eliminated for that one operation

only. If you want the arm/disarm chirps turned off permanently, your

dealer can do this for you.

The remote responds with the normal arm/disarm notifications in

silent mode. (If the remote has beeps programmed On, the remote will

beep.)

NOTE: The Warn Away® response to lighter impacts is bypassed if
the system is armed using Silent Mode. This ensures that no chirps
will be emitted by the siren in an area you want chirp-free. The sys-
tem is still fully capable of triggering. Only the Warn Away®
response is bypassed.

➜

important! The unit can be programmed to respond to one to
five pulses of the Valet

button for the disarm function. Be sure

to check with the installer for the desired programming.