Description, Specifications – Altec Lansing 1715C User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Description
The 1707C and 1715C Mixer/Power Amplifiers offer a will be muted,
highly flexible integration of a user configurable six input
mixer with a fully protected power amplifier in one con
venient cost effective package.
The six input ports accept any of the several input
modules
or
output
module.
The
programmable
input
modules may have their muting circuitry configured in
either "priority", "slave" mode, or may be set to ignore
muting commands. When a module configured in the
"Priority" mode is activated, modules in the "slave" mode
Circuitry is also provided to allow remote volume
control of individual inputs.
Multiple
mainframes
may
be
dynamically
linked
together. Separate preamp-out and amplifier-in jacks allow
the insertion of equalizers or other signal processing
between the mixer and the p)ower amplifier.
A multi-tone generator eind a compressor/limiter are
also provided.
Continuous
Average Power
1707C
1715C
Maximum Midband
Output Power
1707C
1715C
Power Bandwidth:
Direct Output:
Transformer Output:
Frequency Response:
Direct Output:
Specifications
Input Sensitivity / Input Impedance:
75 watts
150 watts
(Reference 1 kHz at 1% THD)
100 watts
175 watts
(Ref. 1 kHz at rated output
power)
better than 20 Hz — 20 kHz
better than 50 Hz — 15 kHz
Transformer Output:
Link Output:
Preamp Output:
±1 dB, 20 Hz - 20 kHz
(Ref. 1 kHz, I watt output)
±1.5 dB, 50 Hz - 15 kHz
(Ref. 1 kHz, 1 watt output)
±ldB, 20 Hz - 20 kHz
(Ref. 1 kHz, 100 mVrms,
10 kil load)
±ldB, 20 Hz - 20 kHz
(Ref. 1 kHz, 0 dBm output,
600 n) load)
Total Harmonic Distortion (THD):
Direct Output:
<0.05%, 20 Hz - 20 kHz
(Ref. 1 kHz, rated output
p>ower, 30 kHz low-p>iiss filter)
Transformer Output:
<1.0%, 50 - 100 Hz
<0.1%, 100 Hz - 20 kHz
(Ref. 1 kHz, rated output
jxjwer, 30 kHz low-pass filter)
link Output:
<0.05%, 20 Hz - 20 kHz
(Ref. 1 kHz, 100 mVrms
output, 10 kil load, 30 kHz
low-pass filter)
Preamp Output:
<0.05%, 20 Hz - 20 kHz
(Ref. 1 kHz, 0 dBm output,
600 fl load, EQ flat,
compressor/limiter off,
30 kHz low-p>ass filter)
Intermodulation Distortion:
(SMPTE 4:1)
Direct Output:
less than 0.1% at rated
power)
Input Sensitivity / Input Impedance:
(For rated output power. Ref. 1 kHz, 0 dBu = 0.775 Vrms)
Using
1780A/1780AT:
(balanced, no pad)
Using
1780A/1780AT:
(balanced, w/pad)
Using
1781A:
(balanced)
Using
178 lAT:
(balanced)
Using
1781A-H785A:
(balanced)
0.3 to 100 mVrms / 10 kil
(-68 dBu to -18 dBu)
3 mVrms to 1 Vrms / 10 kil
(-48 dBu to -f-2 dBu)
0.3 to 100 mVrms / 10 kil
(-68 dBu to -18 dBu)
0.1 to 30 mVrms / 600 il
(-78 dBu to -28 dBu)
0.1 to 30 mVrms / 600 il
(-78 dBu to -28 dBu)
Link Input:
(unbalanced)
Amplifier Input:
(unbalanced)
Rated Output Level /
Minimum Load
Impedance:
Link Output (unbal):
Preamp Output (unbal):
Auxiliary Output (unbal):
Direct Output:
1707C:
1715C:
Transformer Output:
1707C:
1715C:
Damping Factor:
Direct Output:
Signal-to-Noise Ratio:
Direct Output:
(master at minimum)
Direct Output:
(master at maximum)
Link Output:
Preamp Output:
Protection Systems:
Amplifier:
Load:
External DC Supply:
Mainframe:
Equalization:
Bass:
Treble:
100 mVrms / 10 kil
(-18 dBu)
0.775 Vrms / 10 kil
(0 dBu)
(Reference 1 kHz)
100 mVrms (-18 dBu), 2 kil
0 dBm, 600 il min. load
0 dBm, 600 il min. load
Unbalanced
24.5 Vrms / 8 il min. load
24.5 Vrms / 4 il min. load
Balanced
17.4 Vrms / 4.0 il min load
25.0 Vrms / 8.3 il min load
70.7 Vrms / 66.6il min load
25.0 Vrms / 4.2 il min load
34.6 Vrms / 8.0 il min load
70.7 Vrms / 33.3il min load
>40, 20 Hz - 1 kHz
> 105 dB below rated
output power, A weighted.
>80 dB below rated output
power, A weighted.
>75 dB below 100 mVrms
output, A weighted.
>75 dB below 0.775 Vrms
output, A weighted,
EQ defeated, compressor /
limiter off.
• Short circuit current
limiting.
• Over voltage limiting.
• Thermal Sensing.
• Spurious oscillatory
protection.
• Low AC line sensing.
• Output DC detection.
• Subsonic detection.
• Tum-on/tum-off
transients.
(approx 3 seconds)
• DC input fuses.
• AC line fuse.
Shelving Type.
±12 dB at 100 Hz.
±12 dB at 10 kHz.
Note: 0 dBm into 600 il yields 0.775 Vrms.