Altec Lansing 1715C User Manual
Key features, Key system specifications, Description
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1707C/1715C
Six Channel Mainframe
Mixer/Power Amplifier
KEY FEATURES
'k
Six ports for inputs or outputs
★ Offers systemwide remote muting
'A' Built-in compressor/limiter
KEY SYSTEM SPECIFICATIONS
Frequency Response:
Direct Output:
Preamp Output:
Total Harmonic
Distortion (THD):
Direct Output:
Preamp Output:
Signai-to-Noise Ratio:
Direct Output:
(master at maximum)
Preamp Output:
(Ref. 1 kHz)
±1 dB, 20 Hz - 20 kHz
(1 watt output)
±1 dB, 20 Hz - 20 kHz
(0.775 Vrms output, 600 fl
load)
(Ref 1 kHz)
<0.05%, 20 Hz - 20 kHz
(rated output power,
30 kHz low-pass filter)
<0.05%, 20 Hz - 20 kHz
(0.775 Vrms output, 600 fl
load, EQ flat, compressor/-
limiter off, 30 kHz low-pass
filter)
>80 dB below rated output
power, A-weighted
>75 dB below 0.775 Vrms
output, A-weighted, EQ off,
compressor/limiter off
DESCRIPTION
The
Altec Lansing 1707C/1715C Mixer/Power
Amplifier is a six channel user-configurable main
frame amplifier. By selecting from the large array of
system component options, the
1707C/1715C can
become a six-in/one-out microphone mixer/amp-
lifier or a one-in/six-out distribution preamplifier.
The basic mainframe combines a fully protect
ed 75-watt (for the
1707C) or 150-watt (for the
1715C) power amplifier with six ports which can
be input or output. Multiple
1707C/1715C main
frames can be linked together for situations where
more then six input/output ports are required.
Built-in features include a trap-door on the top
panel for easy access into the unit, compressor/-
limiter, low and high frequency shelving equalizers,
muting, remote volume control capability, and a
tone generator which produces four different
sounds.
Input Modules: The Altec Lansing 1780A/-
1780AT Input module and the 1781A/1781AT
Programmable Input module accept either mic or
line level signals through a wide variety of connec
tor interfaces.
Output Modules: The Altec Lansing 1783 Line
Output module allows the user to interface with
other professional equipment.
The
Altec Lansing model 1707C/1715C mix-
er/power amplifier systems respond to most design
tasks with the ease and versatility of systems
costing much more. As a result, it is
the choice for
use in professional Installations requiring high
quality, flexibility in design, and low cost.