Altec Lansing 1593C User Manual
1593c power amplifier
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1593C
POWER AMPLIFIER
DESCRIPTION
The 1593C Power Amplifier is a solid-state unit
delivering 50 watts of power at less than 1% total
harmonic distortion (THD) from 50 Hz to 12 kHz.
The amplifier provides outputs for 4-ohm, 8-ohm
and 16-ohm loudspeakers, plus a 70-volt line out
put for distribution systems. In addition to the
high-impedance input, the amplifier has an octal
socket to accept a line-isolation transformer. A
selectable high pass filter is included for use in
speech systems. Cut-off frequency of the filter is
300 Hz.
The 1593C is capable of operation from a 120V or
240V ac source or a negative grounded 28V dc
source, and features silent, automatic transfer to
dc operation if ac power fails.
Designed for rack mounting, the 1593C occupies
three vertical units of rack space
{S'A”). A hinged
front panel allows servicing without removing the
amplifier from the rack.