Altec Lansing 1715C User Manual
Page 2
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

1707C/1715C Specifications (cont'd)
Continuous Average
Power;
1707C
1715C
Maximum Midband
Output Power
1707C
1715C
Power Bandwidth:
Direct Ou^ut:
Intermodulatlon
Distortion:
Direct Output:
Damping Factor:
I^ect Output:
Rated Output Level:
Direct Ou^ut:
1707C:
1715C:
Pre
2
unp Output:
Transformer Output:
1707C:
1715C:
Equalization:
Betss:
Treble:
CompressorA.lmiter:
Threshold:
Compression Ratio:
Release Time:
Tone Generator:
Tones:
Control:
Level Adjustment:
Protection System:
Amplifier:
Load:
Front Panel Controls:
Input:
Compressor/Limiter:
75 watts
150 watts
(Ref. 1 kHz at 1% THD)
100 watts
175 watts
(Ref. 1 kHz at rated output)
>20 Hz - 20 kHz
(SMPTE 4:1)
<0.1% at rated power
>40, 20 Hz - 1 kHz
(Ref. 1 kHz)
(unb
2
dauiced)
24.5 Vrms/8 ft load
24.5 Vrms/4 ft load
(unbalauiced)
0 dBm, 600 ft min. load
(baleinced)
17.4 Vrms/4 ft load
25.0 Vrms/8 ft load
70.7 Vrms/66.6 ft load
25.0 Vrms/4.2 ft load
34.6 Vrms/8 ft load
70.7 Vrms/33.3 ft load
(Shelving type)
±12dBat 100 Hz
±12dBat 10 kHz
Feedforward Topology
-20 dB to -H20 dB
Continuously variable
(Ref. 100 mVrms on Link input)
1:1 to »:1
Continuously vetfiable
50 msec to 5 sec.
Continuously variable
Electronically produced
Buzzer, siren, single-tone chime,
auid repeating tone chime
All tones
are
initiated by
external switch closures
Reau- panel
• Short circuit current limiting
• Over voltage limiting
• Thermal sensing
• Spurious oscillatory protection
• Low AC line sensing
• Ouq:>ut DC detection
• Subsonic detection
• Tum-orVofftrainsients (=3 secs)
6 - Input Level adjust
1 - Release Time adjust
1 - Threshold adjust
1 - Compression Ratio adjust
EQ Controls:
Output:
Miscellameous:
Rear Panel Controls:
Tone Generator:
Front Panel Indicators:
Connectors:
Amplifier Input:
Link Input:
Battery:
Amplifier Output:
Preamp Output:
Link Output:
Mute auid Tone Generator:
Power Requirements:
AC Madns:
Battery:
1707C
1715C
Power Consumption
and Head Produced:
1707C:
75 watts output:
25 watts output:
1715C:
150 watts output:
50 watts output:
Operating
Temperature Range:
Dimensions
Width
Height
Depth
Net Weight
1707C
1715C
Finish Color:
1 - On/Off switch
1 - Baiss adjust
1 - Treble adjust
1 - EQ In/Defeat switch
1 - Maister Level adjust
1 - AC Power switch
1 - Output Level adjust
6 - Green LED’s (Nominad Input)
6 - Red LED’s (Peaik Input)
1 - Red LED (Maiin Output clip)
1 - AC Power ON
1 - RCA phono receptacle
1 - RCA phono receptacle
1 - 3-terminad bairrier strip
1 - 7-terminad bairrier strip
1 - RCA phono receptacle
1 - RCA phono receptacle
7 - Screw terminails
(Ref. 1 kHz, rated output
with no modules installed)
100/120/200/220/240 VAC,
50/60 Hz.
±48 VDC bipolair
1.5 amps maiximum
3.0 aunps maiximum
165 w consumed, 306 BTU/hour
130 w consumed, 357 BTU/hour
320 w consumed, 578 BTU/hour
230 w consumed, 612 BTU/hour
Up to 50°C (122°F)
19 inches (48.3 cm)
5'A
inches (13.3 cm)
13 inches (33.0 cm)
25 lbs. (11.4 kg)
32 lbs. (14.5 kg)
Black
Accessories Included
with Mainframe:
1 - Operating/Service Instructions for Maiinframe,
1780A/AT, 178 WAT and 1783
1 - Preamp Out to Amp In “U” Shorting Bar
1 - Direct Output to OT in Shorting Bair
1 - System Configuration Label
1 - Intemationad 220/240 VAC voltage decal
1 - Intemationad Fuse deced and fuse
1 - Rack mount hairdwaire kit
Altec Lansing continuadly strives to improve their products and
performaince. Therefore, specifications aue subject to change
without notice.