Audiovox PR-130 - Manual (Page 9)

S Example
1. fCLRJOioid)
/ (srouol.m "OCCUPIED"
1 tsmi "SM.-01" "IS CLEARED"
The above example shows that memory location 01 was occu­
pied with an existing number. By pressing the [STO] key
while the LCD display is blank, you clear the memory loca­
tion making it ready for storing another phone number
6.3. RECALL VACANT MEMORY
LOCATION
Hint
TO SEARCH |RCL], IVALPH), |A]or[T]
When you are storing a telephone number into the repertory
memory, you may overwrite a stored telephone number with
the new one by mistake. To avoid this error, it is best to
search for a vacant memory location before storing. The
phone will always indicate the first available Oowest number)
memory location.
H Example
IRCLI t*/AIiW «VM :29"
Ui "VM;34"
I^J "VM:29”
ICLH
By using the up [▲] and the down [T] keys you can search
additional "EMPTY” location while in this mode of operation.
6.4. RECALLING
6.4.1. RECALL STORED NUMBER BY LOCATION
6.4.2. RECALL SPEED DIAL NUMBER BY
ALPHA CHARACTERS
^Hint
TO RECALL (FCN)+1VALPH)+
[ALPHA CHARACTERS)+(RCLj
This procedure is useful in searching for the telephone num­
ber by the name of the |>erson/company/code that relates to
the phone number.
¥ Example
IFCNl, t*/ALPHl "ALPHA"
[21, (4.1 "ALPHA" "A"
(SU a H a J "ALPHA" "AU"
[9U a ] "ALPHA" "AUDIOVOX"
"SM fl4" "5162333300"
"lOVOX" "5162333300”
In the above example, recalling the NAME "AUDIOVOX”
recalls the number "5162333300"which was stored together
with the NAME "AVDIOVOX” in storage memory location
”04". To verify this, simply press the [RCLlkey and enter
"04”. The phone number and "SM:04"will be displayed
momentarily then the phone number and NAME "lOVOX"
will be displayed. The display will alternate between the first
three characters "AUD" and the balance of ALPHA charac­
ters "lOVOX".
Note
See chapter 6.1.3 STORING ALPHA CHARACTERS for
additional details.
Hint
TO RECALL [RCLHX]- h [X1
This procedure is used to recall a telephone number from
your repertory memory. This procedure can also be used to
confirm the telephone number in repertory memory and to
dial that telephone number with minimum key pressing.
^ Note
The message "EMPTY” \rill be displayed on the LCD dis­
play, if there is no telephone number in the repertory mem­
ory you selected.
6.4.3. REPEAT NUMBER RECALL(SCROUJNG)
Hint
[AlorlV]
AFTER A NUMBER IS RECALLED
(CLRI
After recalling a number from your repertory memory, you
can review previous and next stored telephone numbers by
simply pressing the up [Aland the down [▼] keys. To termi­
nate the scrolling, press the (CLR) key.