Audiovox PR-130 - Manual (Page 11)

6.6. RE-DIAUNG
6.6.1. REDIAL THE LAST 9 TRIED NUMBER
Hint
it Ebcample
TO REDIAL [RCL1+[RCL)+[A| or [Tl+ISENDJ
TO CANCEL : [END)
The PR130 has 9 auxiliary memories for storing the last 9
telephone numbers you tried calling. You can search the his­
tory of the last 9 called numbers by uang the up | A) and the
down [▼! keys.
15 Example
IRCLI IRCLI “LASTI" ''5162333300”
Ut 1 "5162333301"
!▼! : "LASTI" "5162333300"
(SENDl "5iea3333oo"
6.6.2. REDIAL LAST CALLED NUMBER
Hint
C
TO REDIAL
TO CANCEL
[RCL]
[END] +[0j+[0i+lSEND) I
^ I
To recall the last number your phone was connected to ^ou
had a conversation), press the [RCLl key and the [0] key
twice. The last number called will be displayed on the LCD.
Then press the [SEND] key to dial and call the number.
6.6.3. AUTOMATIC NUMBER REDIAL
" Hint
TO REDIAL IFCNl+lSEND] (From beginning)
or (SENDl (After reorder tone)
or [SEND] (Hold for 0.5 seconds)
151...101 "5162333300"
[SENDl "5162333300"
reord^-tCHie
ISEND) "REDIAL" "5162333300"
Fast rk^ tone & State
'■Note
If all redial attempts to reach the called number fail, the
PR130 will generate a reorder tone for 30 seconds and auto­
matically stop the redial feature.
6.7. TKANSMIT DfTMF SIGNAL
O' Hint
TO TRANSMIT ; [X| (while in conversation)
: or for a stored DIMF ^gnal in memory
: [RCL]+[X1+[XHFCN1+[SEND]
If you press a digit key wlule in conversation, a DTMF tone is
transmitted. If you want to transmit the DTMF digits stored
in the repertory memory, you can recall the DTMF digits
horn repertory memory by using IRCLI key and location
key(s) [X], [XI and then pressing the [FCN] key and the
[SEND] key. It is important to note that if the volume of the
key tone is in the mute state, no DTMF tone will be transmit­
ted.
•■Note
Pressing the (FCN) and the ISENDl key in sequence is
used for two kinds of functions. The first is for the automatic
redial function in standby mode and the other is for trans­
mitting a DTMF signal while in conversation.
In case the cellular system is busy or you are in a weak signal
area and the call is not connected successfully, you can use
this feature to help you connect your call as soon as possible.
When this feature is activated, the phone will try to dial the
called telephone number 10 times until tiie call is successfully
connected. The length of each call attempt is 5 seconds.