Vitek VT-4086 SR - Manual (Page 12)

ENGLISH
interlaced scan mode orY-Pb-Pr for progressive scan mode.
• RGBistooutputSCARTsignal.
• VGA is to set PC-VGA signal output. When you connect the TV set via
the VGA terminal.
TV Mode
This item is to set the DVD player video output format in normal interlace
mode or high performance progressive scan mode.
NOTE: Make sure the connected TV set can support progressive scan
TV signals and theY-Pb-Pr cables connected correctly before switch
to progressive scan mode. In progressive scan mode, there willbeNO
Video signal and S-Video signal
output.
Video Quality Setup
a m>
Video Setup Page
Sharpness
Brightness
MID High
Medium
Low
00
Contrast 00
Gamma NONE High
Medium
Low
Hue 00
None
Saturation 00
Luma Delay IT OT
IT
Brightness Contrast Hue Saturation
Set to different values according to the connected TV set and the video
source to get best picture quality or your liking.
To changevalues, scroll to the item and press ENTER button to enter,
and change setting values with left/right button, press ENTER button to
confirm new value and return to the setup menu parent page.
HDMI
When you connectto theTVsetvia HDMI wire, selectthis option to get
the high vivid picture quality.
Characteristics:
Q (TO ^ ^ ' a K
HDMI SETUIP
HDMI
Resolution
ON ON
OFF
480i
480P(720)
480P(1440)
720P(60Hz)
1080I(60Hz)
576i
576P(720)
576P(1440)
720P(50Hz)
1080P(50Hz)
HDCP Setup ON ON
OFF
Video Format YUV RGB 4:4:4
YCbCr 4:4:4
AUDIO Source SPDIF SPDIF
12S
HDMI SRC OFF ON
OFF
Just needing one connection cord can deliver high definition both
audio and video signal.
It supports standard, enhance or high definition digital video modes
ofTVset, and supports standard stereo, multi-channel surround
sound or digital stereo audio styles.
It supports uncompressed digital video signal so that it can get a
high fidelity video effect.
It supports HDCP (High-band with digital contain protection)
decoded technique so that itwill not be limited by signal encrypt.
RESOLUTION
1 .
2 .
3.
According to your TV set’s resolution to select the corresponding
option to obtain the best vision effect.
HDCPSetup
ON/OFF
VIDEO FORMAT/AUDIO SOURCE/ HDMI
To selectthe HDMI’svideo/audio output mode, or close/offthe
HDMI source.
Preference page
TVtype PAL PAL/AUTO/NTSC
Audio English
English/French/Spanish/Chinese/
Japanese/Korean/Russian/Thai/others
Subtitle English
English/French/Spanish/Chinese/
Japanese/Korean/Russian/Thai/OFF
Disc menu English
English/French/Spanish/Chinese/
Japanese/Korean/Russian/Thai/others
Parental Control
1 KID SAF/2 G/3 PG/4 PG13/5 PRG
6R/7NC17/8 ADULT
Default Reset
TV System
The output ofTVsystem can be set to PAL/AUTO/NTSC.
AUDIO/SUBTITLE/DISC MENU
Choose the default language you would prefer to for DVD titles, audio,
disc menu.
Note: Not all DVD discs are recorded with multiple languages.
Sharpness Gamma Luma-delay
Select different options according to the connected TV set and the video
source to get best picture quality or your liking.
PARENTAL CONTROL
Allows the user to set a maximum rating of movie that can be laid (e.g.
PG rating). Movies rated higherthan the level setwill not be played. The
parental lock can only be changed after input the correct password.
Note: This function is available only when the disc has rating encoded
on.
CHANGETHERATING
1. Press UPor DOWN button to select the desire level.
2. PressENTERbuttontoconfirm.
3. Input parental control password. The factory setting of the password
is 31680.
4. Press ENTER button to active the new setting.
Default
To restore all setup parameters to the factory settings EXCEPT the pass­
word. Note:
You can restore all setup parameters by pressing the DEFAULT key on
the remote controller.
Password Setup Page
a
«(Q), 3 ^
--PASSWORD SETUP PAGE --
PASSWORD MODE ON On
Off
PASSWORD CHANGE
PASSWORD MODE
To enable or disable password protection when parental level is
changed.
Default setting is password mode ON.
Before setting changed, you need to inputthe proper password.
PASSWORDCHANGE
To changethe password, you need to:
1. Input old password.
2. Input a 6-digit new password.
3. Inputthe new password again to confirm.
NOTE: Ifyou forget the new password, you can always use the factory
setting password 316800.
1?