Removing and replacing light bulb, To remove the light bulb, To replace the light bulb – SINGER 9113 User Manual

Page 39

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

REMOVING AND REPLACING LIGHT BULB

CAUTION:

• Before changing light bulb, make sure you have removed plug from socket outlet. Be

sure to replace the face plate which covers the light bulb before operating the machine.

• This machine is designed to use a 15-

watt maximum light bulb.

To change the light bulb, the face plate

must first be removed.

Loosen and remove screw (1).

Slide face plate down and away from

machine.

TO REMOVE THE LIGHT BULB

• Push bulb up into socket (2) and turn

to the left to unlock bulb pins.

• Pull bulb down and out of socket.

TO REPLACE THE LIGHT BULB

• Push new bulb up into socket and turn

to the right until pins lock into position.

• Reposition face plate by sliding top edge

of plate under edge of top cover.

• Line up screw hole in plate with screw

hole in machine.

•

• Insert screw and tighten.