Winding a bobbin – SINGER 9113 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
WINDING A BOBBIN
The wind-in-place bobbin winds quickly and easily while it’s in the machine.
• Raise needle to highest position by
turning hand wheel toward you.
• Raising presser foot.
• Open slide plate.
Turn pattern selector dial (1) until indicat
ing dot lines up under Straight Stitch/
Bobbin Winding. (Details on “Selecting
a Pattern” are on page 18.)
Put an empty bobbin, with black rings
(3) facing up, into bobbin case (4).
•
• Close slide plate, lining up marks (5) on
slide plate and machine bed. This
engages the bobbin winder.
• If your machine has pop-up automatic
positioning button (6), close slide plate
until it stops against button. This will
automatically engage bobbin winder.
- 401A (116 pages)
- Simple 3116 (94 pages)
- 1507 (88 pages)
- 1507WC (88 pages)
- 112W140 (32 pages)
- 147-2 (30 pages)
- 114-33 (43 pages)
- 119-3 (23 pages)
- 14K1 (10 pages)
- 147-104 (34 pages)
- 116-1 (20 pages)
- 115-2 (38 pages)
- 14U286 (40 pages)
- 14U286B (21 pages)
- 114-4 (29 pages)
- 142W25 (10 pages)
- 147-81 (28 pages)
- 118 (16 pages)
- 136W105 (22 pages)
- 114-41 (20 pages)
- 147-4 (28 pages)
- 105-3 (30 pages)
- 1027 (36 pages)
- 147-26 (37 pages)
- 12W208 (25 pages)
- 128-4 (25 pages)
- 109-320 (14 pages)
- CP17 (47 pages)
- 147-6 (56 pages)
- 132B26 (9 pages)
- 114-2 (36 pages)
- 1371A3 (86 pages)
- 14CG754 (53 pages)
- 147-50 (39 pages)
- 14T967DC (3 pages)
- 109-520 (13 pages)
- 14SH654 ULTRALOCK (48 pages)
- 147-86 (30 pages)
- 105-20 (23 pages)
- W303 (13 pages)
- 147-38 (53 pages)
- 114-22 (45 pages)
- 1375A1 (33 pages)
- 107-2 (31 pages)
- 1200A (4 pages)