M” stitch, Lace trim, Crescent stitch – SINGER 9113 User Manual
Page 30: Border design, Illlo -t
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
“M” STITCH
This stitch can be used for stretch seams and decorative stitching.
LACE TRIM
Lace trim may be added to blouses, lingerie
and children’s wear.
• Cut lace to desired size.
• Pin lace to right side of fabric where
desired.
RECOMMENDED SETTINGS
Stitch Selection:
“M” Stitch
Stitch Width:
illlo -T-
Stitch Length:
2 or lower
Foot:
Special Purpose (J)
Needle Plate:
General Purpose
(A)
• Carefully stitch along both edges of
lace, as shown.
• Trim away the fabric under the lace
near stitching lines.
CRESCENT STITCH
This stitch is ideal for borders, edges, smocking and embroidering.
BORDER DESIGN
Border designs decorate clothing and
many household items.
• Sew seams in usual manner and press.
• Mark stitching lines of fabric where
desired.
•
RECOMMENDED SETTINGS
Stitch Selection :
Crescent Stitch
Stitch Width:
IB
Stitch Length:
1 or lower
Foot:
Special Purpose (J)
Needle Plate:
General Purpose
(A)
• Center marked line under presser foot
and stitch.
• Pull threads to wrong side of fabric; tie
and trim.