Section 2 getting ready to sew, Choosing and changing needles, Getting ready to sew – SINGER 9113 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SECTION 2
GETTING READY TO SEW
CHOOSING AND CHANGING NEEDLES
IMPORTANT: For best sewing results, use only Singer needles.
Check the needle package, and the Fabric, Thread and Needle Table on page 4i, for the
correct needle and fabric combination.
• Raise needle to its highest position.
• Loosen needle clamp screw and remove
needle.
• With flat side of needle to the back,
insert new needle up into clamp as far
as it will go.
• Tighten needle clamp screw securely.
Free arm sewing makes it easier to sew hard-to-reach areas.
To change machine for free arm sewing,
push in and lift right edge (1), of extension
table, slide it to the left and off the
machine.
• Topstitch edges on sleeves, or finish
waistbands and pants legs easily.
Attach buttons without stretching cuffs
and neckbands.