Threading – SINGER 14T948DS User Manual

Page 20

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Threading

Left needle(Yel low)

- Place the spool on the

spool holder pin.

- Bring thread through guide( 1)
- Pull the thread under the protector(2)

and pass under the guider up to
go around the pre-tension(3)

- Thread guide(4,5)
- Thread left needle eye(6)
- Place thread under presser

foot.

After threading

When threading is complete, lower

the presser foot and close the
looper cover and cloth plate.

Note:
If the lower looper has to be re

threaded, cut both needle threads

off at the needle eye and remove

surplus thread from below. Thread

the looper and then

re-thread the needles.