Presser foot lifter, Using the machine – SINGER 14T948DS User Manual

Page 10

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Using the machine

Handwheel

The handwheel turns

counterclockwise.

Presser foot lifter

To raise the presser foot, raise

the lever on the rear of the

machine until it engages.

Changmg the presser foot

-Switch the machine off “O”.

-Raise the presser foot.

Press the catch (A) to release the

presser foot from the clamp.

Raise the presser foot lifter to the

highest position and remove the

presser foot sole to the left.

To attach the presser foot sole,

place it under the shaft.The

groove in the shaft should line up

exactly with the presser foot pin.

Lower the shank and the presser

foot will engage automatically.