SINGER W510 - Manual (Page 50)

CORDING AND ZIPPER FOOT
The cording and zipper foot is used to
sew in zippers and insert cording.
X X I I I . U S E O F T H E A C C E S S O R I E S
139
Zipper:
Set the needle position at "L" or "R”
as needed to sew the right side or the
left side of zipper respectively, so that
the foot sews very close to the zipper
teeth.(Fig. 140)
To insert cording:
I . S e t the needle position at "R" and
make the welting by sandwiching the
cord into a bias strip of fabric.
Stitch close to cord. (Fig. 141 j
2. Set the needle position at "L".
Sandwich the welting between two
layers of fabric with right sides
together. Stitch a second time. The
needle stitches close to the cord
through all thicknesses. (Fig. 142)
QUILTING GUIDE
Parallel straight lines are easy to sew
with the quilting guide. (Fig. 143) To
attach the guide, slide it into the black
clip at the back of the presser foot
shank. Adjust the curved bar to the
desired distance from the needle. Sew
the first line of stitching as desired, and
then for the succeeding rows let the
guide follow along the previous line of
stitching. A straight stitch, zigzag, or
any other stitch may be used.
142
48