SINGER 101-12 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

6
To Open Cabinet 40
(S
ee
F
igs
. 3, 4, 5
and
6)
Raise the two leaves at the top of the table and
the supporting rod will automatically spring out at
F
igs
. 3
and
4. To O
pen
C
abinet
40
the left of the table. Allow the left leaf to rest on
the supporting rod and the right leaf to hang
loosely at the right of the table, as shown in Fig. 4.
With the right hand raise the front hinged portion
(B, Fig. 5) of the table, and at the same tijne, place
the left hand under the front side of the arm of the
machine, as shown in Fig. 5,
being very careful
not to touch the electric lamp or shade»
and
raise the sewing machine head, then replace the
hinged portion of the table and lower the machine
so that it rests on the table, as shown in Fig. 6.