SINGER 101-12 User Manual
Page 51
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(C, Fig. 47) and the adjusting finger (F, Fig. 47).
To make a wider plait, move the adjusting finger
(F) back or toward the needle and turn the adjust
ing screw (C) downwardly. To make a smaller
plait, turn the adjusting screw (C) upwardly. The
distance between plaits is regulated by the length
of stitch.
To Adjust the RufHer for
Group Plaiting and Gathering
The ruffier can be adjusted for group plaiting by
lifting the adjusting lever (E, Fig. 48) and moving
49
F
ig
. 48
it to the right so that the top of the projection
(D, Fig. 48) engages the small slot indicated by the
star on the adjusting lever. This should be done at
the points where you wish to make the space be
tween thB plaits. The ruffier will then stop and
plain stitching will be made. When the desired space
has been made, adjust the lever (E) so that the pro
jection (D) enters either the slot marked “6’^ or the
slot marked “12.’^ By alternately making groups of
plaits and plain spaces, as shown in Fig. 48, very
attractive work can be produced.