SINGER 101-12 User Manual
Page 42
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

ADJUSTABLE HEMMER—Wide Hemming
To make a hem moi’e than jf inch wide, loosen
the thumb screw in the hemmer and move the scale
40
F
ig
. 39
to the right as far as it will go, then swing it toward
you as shown in Fig. 39 and tighten the thumb
screw. Fold and crease down a hem of the desired
width; pass the fold under the extension at the right
of the hemmer, and the edge into the folder as
shown in Fig. 39, and proceed to stitch the hem.
BINDER—Binding
Remove the presser foot and attach the binder in
its place. Pass the binding through the scroll of
the binder and draw it back under the needle.
Place the edge of the goods to be bound between
the scrolls of the binder and draw it under the needle.
Lower the presser bar and sew as usual. To make
French folds, proceed as directed for binding, except
that the fold is stitched on to the face of the material