SINGER 101-12 User Manual
Page 54
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Start the machine by pressing the knee lever and
steadily move the work forward and back; The
52
F
ig
.
50.
U
sing
the
D
arning
F
oot
darning or embroidery will be quickly accomplished
with ease and without skipping of stitches or break
ing of thread.
After you are through with the darning or em
broidery, raise the presser bar, take out the embroid
ery hoops or darner, take off the feed cover plate
and remove the darning foot. Replace the presser
foot and the machine is again ready for the usual
sewing.
This manual is related to the following products: