Adjust the needle thread tension for zigzag stitch – SINGER 384.13012 (Sold at Sears) User Manual

Page 32

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Adjust the Needle Thread Tension for Zigzag

Stitch

For an ideal zigzag stitch, the bobbin thread does not show

on the right side (Top side) of the fabric and needle thread
shows slightly on the wrong side (Bottom side) of fabric.
See the illustrations for correct appearance.
To match this appearance, adjust the needle tension.

• Correct tension

(T)

Right side (Top side) of fabric

(2) Wrong side (Bottom side) of fabric

Minimize amount of needle thread visible on the wrong

side (Bottom side) of fabric without causing excessive
puckering or causing bobbin thread to show on the right side
(Top side) of fabric. Results vary with fabric, thread and
sewing condition.

•Tension is too tight

Corner of each zigzag pulls together on the right
side of fabric.

•Tension is too loose

® Right side (Top side) of fabric

The needle thread loops through wrong side (Bottom side)
of fabric and is pulled almost together.

This manual is related to the following products:

384.13012