SINGER 1200 Athena User Manual

Page 74

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

MAl

TWO-STEP BOTTOriHOLlNG

Make a test buttonhole on a sample of your

fabric, with interfacing if being used, before
working on your garment.

• Determine length of button and mark start

and end line of buttonhole on fabric.

• Attach general purpose needle plate and

iwo-sieo buttonhole foot.

® Draw needle and bobbin threads under foot

towards back of machine.

» Place fabric under foot so that buttonhole

start line is aligned with red guideline on
foot. Lower foot.

• Select left side of buttonhole by pushing

button on pattern selection panel.

« Select slow speed, start machine and let it

complete left side of buttonhole.

« Stop machine just before guideline on but

tonhole foot reaches the buttonhole end line
of the fabric.

9 Select right side of buttonhole by pushing

button on pattern selection panel.

• Start machine and let it complete right side

of buttonhole. Stop sewing when stitching

reaches starting bar tack.