SINGER 1200 Athena User Manual

Page 58

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Ladder Seam

SHndstitohsrig a Ladder Seam

The blindstitch ladder seam Is particularly ap

propriate for kr^it and stretch fabrics. It is ideal

for stretchable construction seams, and edge
finishes for necklines, pockets and collars in

sportswear and swimsuits.

« Stitch; blindstitch
® Stitch width: to suit fabric
» Stitch length: to suit fabric
® General purpose needle plate
® General purpose foot

1. Make a test sample to adjust stitch width

and length and needle-thread tension to

suit the fabric. (Needle-thread tension
should be lighter than normal)

2. Cut and fit garment, allowing for 5/8-lnch

(1.5cm) seam allowance. Baste seam line.

3. Place fabric under presser foot so that the

straight stitches fall on the seam line bast
ing and the points toward the center of the

garment.

4. After stitching, open seam> by pulling fabric

back on opposite sides of the seam to pro

duce ladder effect. Press seam allowance
after opening.

Opening Seam to Fixm Ladder Effect