SINGER W8910 - Manual (Page 52)

Letter cassettes
When using the cassette with monogram/script letters,
it is necessary to cut the threads between the letters.
These letters can not be alterated in the height.
If you wish the machine to fasten the thread ends after
completing each letter, press the finishing button ©
before starting to sew. You can now trim the threads
between the letters or in the space between the words
without running the risk of pulling the threads.
Press the finishing button 0 when the whole
program is finished. The threads to be trimmed are
marked in white in the illustration. When sewing mono­
grams we recommend that you sew at slightly reduced
speed.
If you wish to sew a monogram, you can use the
decorations to be found to the right of the cassette.
In some cases the decorations should be sewn the
original way. Others will be better symmetrically if the
final part is mirrored.
Should the letter start far to the
the space between the decoration i
an intermediary stitch.
ft, you can increase
id letter by inserting
The letters on the cassettes can also be mirrored and
you can sew a monogram from the wrong side of the
fabric using lurex thread or similar. Wind the lurex on
the bobbin.
You can also have a name programmed and sew a
pattern from the other cassette. As soon as you press the
push-button PROG/REP, you can sew the programmed
stitch or letters irrespective of which cassette is inserted
in the machine.
However, as soon as you switch off the machine all the
programming will disappear.
50