Pentax ZX-5N - Manual (Page 80)

(10) SETTING THE FILM SPEED (ISO) MANUALLY
>
o
<
>
z
a
m
o
O
•0
m
3
>
H
5
z
(A
This camera automatically reads the film speed from
the film's DX code. However, the film speed setting can
be changed. If you use a non-DX coded film, set the film
speed manually.
How to set
1. To change the ISO to a larger number (higher film
speed), turn the exposure compensation dial while
holding down the exposure compensation dial re­
lease button and align [▲ , with the index line as il­
lustrated.
2. To change the ISO to a smaller number (lower film
speed), turn the exposure compensation dial while
holding down the exposure compensation dial re­
lease button and align [T: with the index line as il­
lustrated.
3. Depress the memory lock button until the desired
ISO is indicated on the LCD panel.
4. After the ISO is set. move the exposure compensa­
tion dial to 0 (.
• The shutter cannot be released with the exposure
compensation dial set at I A or [ ▼ ).
• When the ISO film speed is set manually, [ ISO ap­
pears on the LCD panel.